“G” and “T” type door pull design identifications:
“G” is normally a straight leg handle
“T” is normally an offset leg handle
Originally type “G” door pulls were designed for glass door application and “T” type were designed for frame/flush door applications. However, with the correct mounting hardware some “T” design pulls will function on glass door applications, while all “G” design pulls will function, in principle, on frame/flush door applications. Consult with your Elmes sales representative or customer service personnel for door pull design interchangeability.
Required general product information to properly specify an ELMES door handle design.
a) Design number, material requirement and finish detail.
Example: T6010-01-001
T = Design Identification
6010 = Model number
01 = Material requirement
001 = Finish Detail
b) Center-to-Center and/or Overall Length
c) Determine your mounting application requirements: Pair (Back-to-Back) or Pieces (Single Mount). In case of single mounting application, please specify whether it is going to be mounted onto the interior or exterior of the door.
d) Specify type of door: wood, steel, aluminum, glass or frame.
e) Specify door thickness, i.e. 1⁄2”, 3⁄4”, 1 3⁄4”. Please let the Elmes sales representative or customer service personnel know if the handle is going to be mounted onto a door with variable thicknesses (if applicable): i.e. top – 1 3⁄4” Aluminum frame and bottom – 1⁄2” glass), The price will change accordingly.
In case of single mounting, the following mounting methods can be adopted as shown in INSTALLATION
a) With flat head machine screws or pan head machine screws (available free of charge)
b) With finish washers (available at an additional charge)
c) With decorative end caps (available at an additional charge)
d) Concealed mounting is available for the interior side of handle with the following hardware at an additional charge.
- Thread insert for wood door
- Riv Nut for steel and alumimum door
e) Surface mounting for hollow steel and aluminum door. Utilizing reinforcement inner plate fitted with welding by the door manufacturer. (available at an additional charge)
Hairline is very similar to the standard US satin brushing, but done in a vertical motion with uniformed and defined lines.
In general, most push/pulls use only two mounting legs when the door pull is attached to the door or frame. However, depending on the length, Elmes Door Hardware may recommend the use of three or four point mounts. An additional charge per mounting leg will apply.
a) List pricing is available to all architectural offices and general contractors. List pricing consists of one pair of push/pull handles in a back to back application. Mounting hardware is included.
b) In case of piece supply (Exterior side or Interior side only) for single mounting, please contact Elmes sales team.
a) Order processing and product delivery is 3-5 weeks for standard items which starts from receipt of formal purchase order.
b) Expedited shipping available.
c) F.O.B. Torrance, CA 90501, unless otherwise specified.
d) On shipments of less than $100.00 net, minimum charge per invoice is $20.00.
Claims for shortages must be made within 30 days of invoice date.
Elmes welcomes the opportunity to quote on any custom designs. Please submit drawings to Elmes for review and pricing. Certain guidelines must be followed.
a) PITCH (Center-to-Center)
The pitch can be changed on any tubular pull given enough time and quantity.
b) E-PITCH (Mounting Location from End of Tubular Pull)
The E-Pitch can be changed on any tubular pull given enough time and quantity.
c) OVERALL LENGTH
The Overall length can be changed on any tubular pull given enough time and quantity.
d) CAST PULLS
Cast designs should be thoroughly discussed with Elmes to ensure whether the design is economically feasible or not, in terms of the materials, finish, etc.
e) LENGTH REQUIREMENTS
Pulls with custom lengths may require a modification in design to ensure adequate and safe mounting.
Most tubular designs can be ordered with different finishes than what is shown in the catalog. Please note that certain guidelines apply when specifying a custom finish on a door.
Once we receive final order and specification, we will start the production immediately. Which please note. Any change or cancellation will result in additional or cancellation fees to cover material and labor costs.